Philips 32FD9954 32FD9954/17 power supply board Repair Service
Usual symptoms:
- The TV makes several relay clicks when you turn it on and then switches to the protect mode (flashing red light)
- The TV doesn't start when it's cold
- The TV has no power at all, no standby light.
 |
How it works:
- Fill out the form with contact and shipping info on the next page.
- Pack and ship the board for the repair, email us a tracking number
- In several days your board is fixed/tested. You can trace the repair process trough Order Status page.
- We ship back the board when we've received your payment
Note: Sometimes, the bad power supply board could cause other boards of the TV to fail. For instance, when the TV with bad power supply board is forced to work long time by heating the boards. As a result, a sustain board(s) could get a damage; therefore, you need to repair the power supply board and the sustain board. So, make sure you have tested x-sustain, y-sustain, abusl, abusr, and other boards before sending the board for repair.
If the TV doesn't work with repaired power supply board most likely one of the sustain boards is dead- in that case a repair or replace your sustain board(s) will cost additional $100.
The repair service is warranted for 6 months, during that time we'll repair or replace your power supply board for free.
Q: I have installed repaired board and my tv doesn't work.A: Check all connector, any missing or not properly connected plug could result in protection mode (flashing red light). Otherwise, your TV most likely has a bad sustain board(s).
Not sure what else is wrong with the tv? just order power supply board from parts page and you can return it later ($40 restocking/testing fee).
Please contact us if you have a question about this service.
